VMS Transpa Fix 20 ml

VMS Transpa Fix 6K is a specialized adhesive designed specifically for clear plastic parts. Unlike typical styrene or CA glues that can damage delicate clear parts, or classic clear part adhesives that are irreversible, Transpa Fix 6K allows for perfect handling, repositioning, and clean results. The adhesive is incredibly versatile and gives you the time you need to accurately position your clear components without the risk of fogging, cracking, or permanent damage.

Key Features:

• Ideal for Clear Parts: Specially formulated to bond clear plastic parts (like windows, lenses, and light covers) without damaging or fogging them.
• Extended Working Time: No more rushed positioning. With Transpa Fix 6K, you have all the time you need to adjust and place your parts before the adhesive sets.
• Easy to Remove Excess Adhesive: Any excess adhesive can be easily cleaned up, leaving behind a smooth, flawless bond.
• No Crazing or Fogging: Unlike traditional styrene or CA glues, this product does not cause plastic crazing or fogging on clear parts, ensuring perfect clarity and finish.
• Flexible Application: It is compatible with both acrylic and enamel painted models without damaging the paint or leaving marks.

How to Use:

• Best Application Method: Apply with a precision brush for clean, accurate control, especially for small or delicate parts.
• Thinning: If the glue dries too quickly or is too thick, simply add a small amount of VMS Universal Weathering Carrier (Light Type) to improve flow and slow the drying process. Avoid over-thinning.
• Drying Time: The glue will be dry to the touch in less than 1 hour. However, since it is trapped between clear parts, allow 24-48 hours for the bond to fully cure and gain maximum strength.

Frequently Asked Questions:

• How effective is the adhesive?

  • On average, each model requires around 0.1-0.3 ml of adhesive. The 20 ml bottle will last you a long time, making this an extremely cost-effective solution.

• What to do if the glue dries too quickly?

  • If you're experiencing stringing or rapid drying, simply add a small amount of Universal Weathering Carrier (Light Type) to thin the glue slightly and slow the drying process.

• Can I use it to cement photo-etched (PE) parts to clear parts?

  • Yes, Transpa Fix 6K works well for bonding PE parts to clear plastic. Just make sure to degrease the PE parts first using VMS Styrene Cement (Standard Type).

• Can I use it to glue clear parts to painted plastic?

  • Yes, the adhesive works with acrylic-painted models. However, if your model is painted with enamels, try to minimize manipulation of the glue to avoid affecting the paint.

• How to remove excess glue?

  • Any leftover glue on the model or clear parts can be cleaned using a brush soaked with Universal Weathering Carrier (Light Type).

• How to clean brushes after use?

  • Clean your brushes with Universal Weathering Carrier (Standard or Light Type) to prevent residue build-up.

Recommended Techniques:

• Brush Application: For precision and ease of use, apply with a fine, precision brush to avoid excess application and get clean results.

Combine With:

• Clear parts (e.g., windows, lenses, etc.)
• VMS Styrene Cement (Standard/Fast Type) for PE parts.
• Universal Weathering Carrier (Light Type) for thinning and cleaning.

20 ml bottle